Product categories

Victron Phoenix Smart IP43 Charger 24V/25A (1+1)

14 593 CZK 12 060 CZK without VAT

After order for 5 days

Code: SOPGWL0485 PN: PSC242551085 Warranty: 60 months
Victron Phoenix Smart charger 24V/25A (1+1 outputs) Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software... more
Victron Phoenix Smart charger 24V/25A (1+1 outputs)

Bluetooth Smart enabled
Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.

Phoenix Smart (1+1): two outputs to charge 2 battery banks
The second output, limited to approximately 3A and with a slightly lower output voltage, is intended to top up a starter battery

Automatic voltage compensation
The charger compensates for voltage drop over the DC cabling by slightly increasing output voltage when the DC current increases.

Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage
The Phoenix Smart Charger features our well-known ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the charge process relative to the way the battery is being used.

The right amount of charge: variable absorption time
When only shallow discharges occur (a yacht connected to shore power for example) the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery will be fully charged.

Preventing damage due to excessive gassing: the BatterySafe mode
If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached.

Less maintenance and aging when the battery is not in use: the Storage Mode
The Storage Mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the Storage Mode float voltage is reduced to 2.2 V/cell (13.2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.

Also charges Li-ion (LiFePO4) batteries
Charger on-off control can be implemented by connecting a relay or open collector optocoupler output from a Li-ion BMS to the remote on-off port. Alternatively full control of voltage and current can be achieved with Bluetooth.

Fully programmable charge algorithm
The charge algorithm can be programmed with help of Bluetooth or the VE.Direct interface. Three preprogrammed algorithms can be selected with the mode button.

Remote on-off
The remote on/off consists of two terminals: Remote H and Remote L. A remote on/off switch or relay contact can be connected between H and L. Alternatively, terminal H can be pulled high, or terminal L can be pulled low.

VE.Direct interface
For a wired data connection to a Color Control panel, PC or other devices.

Programmable relay
Can be programmed using the VE.Direct interface or a Bluetooth enabled device to trip on an alarm or other events.


SPECIFICATIONS

Input voltage:
AC: 210–250 V
DC: 290–355 V
Charge current: 25 A
Low current mode: 12.5 A
Relay: programmable, max. DC 5 A, 28 V
Operating temperature: -20 to +60 °C (rated output current up to +40 °C)
Protection category: IP43
Battery connection: Screw terminals 16 mm2
AC connection: IEC 320 C14
Dimensions: 249 × 180 × 100 mm (9.8 x 7.1 x 4.0 inch)
Weight: 3.5 kg



VictronConnect app (Android)


VictronConnect app (iOS)


VictronConnect app (Mac)

The application can also be downloaded from the Victron Energy website:
https://www.victronenergy.com/support-and-downloads/software#victronconnect-app


Brand
Manufacturer :  VICTRON
Type specification :  Electrical accessories (up to 15kg, 50+ cm)
Technical specification
Max. operating temperature (°C) :  60
Min. operating temperature (°C) :  -20
Inputs and outputs
Connector :  terminal
Power supply
Max. output voltage (V) :  25
Frequency (Hz) :  45-65
Input Voltage (V) :  230 (AC)
Input Voltage (V) :  290 - 355 (DC)
Output voltage (V) :  24 (DC)
Warranty
Warranty period CRN (months) :  60
Warranty period EU (months) :  60
Physical properties
Weight (kg) :  3.5
Dimensions :  249 × 180 × 100 mm
Hodnocení můžou přidávat pouze přihlášení uživatelé a ti kteří produkt zakoupili
Scroll